Calgary Exterior Painting & Exterior Coatings
Reborn has a highly experienced team of painters that have worked in the new home and new commercial (retail stores, office buildings etc.) painting business for many years. With a complete understanding and ability to work on tight timelines, with other trades simultaneously, and provide an excellent end product, Reborn’s new construction crews are able to meet and exceed the requirements of this high demand atmosphere.
In addition to new construction painting, Reborn also provides repainting services to its commercial clients. Many corporations require periodic repaints to maintain a fresh look in their facilities, as well as to ensure specialty coatings are not neglected, such as non-slip coatings, water and heat resistant coatings, etc.
We provide the ability to both update the color of your home, from the 1990's pastel colors to contemporary styles, whilst simultaneously restoring the durability and integrity of the stucco surface. This is achieved with a premium architectural paint product called 'Elastomeric.' It's a rubber-based coating which provides a breathable yet waterproof layer, ideally suited to stucco or masonry surfaces.
Elastomeric coatings strike a careful balance between water resistance properties on the one hand, and vapor transmission rate, or permeability on the other. Water resistance is important for locking out moisture, e.g., wind driven rain; water vapor permeability is essential to allow moisture from within the substrate, or in the building itself, to escape through evaporation. Moisture in any form can find its way into cracks and openings, but wind driven rain is able to penetrate even the finest cracks. Although an elastomeric waterproof coating effectively seals out moisture, water vapor from within a masonry surface can escape through it without blistering.
Commercial & Industrial Floor Coatings
This category is part in parcel to the non-slip coatings category, but industrial coatings go beyond just non slip applications. In high traffic environments where heavy machinery and chemicals are used, heavier duty floor coatings must be applied that will withstand the abuse of every day wear and tear of industrial facilities. Reborn’s industrial floor coating specialists offer a wide variety of applications that will maintain the most durable finish for commercial and industrial floors.
Fence & Deck Painting or Staining
Whether newly installed or previously finished, Reborn provides many options for coating decks and fences. These areas tend to take a beating with constant exposure to harsh elements, and often times require recoating every couple of years to maintain. If not properly performed, coating these areas may not even last one year. Reborn has developed systems that will maximize the longevity of deck and fence coatings. By combining extensive preparation techniques with top of the line products and thorough examinations of each specific case, Reborn is able to offer the best possible applications for decks and fences in both stains and solid colors.
Siding, Trim, Soffit, Facia & Window Painting
When it comes to general exterior house painting, Reborn’s record of excellence is unrivalled. With over 50 years of combined experience, our team of exterior painters are the best in the business. We are trained to identity many issues to look for while performing our extensive prep work on repaints, and we have the tools, products and knowledge to address these issues. Over the years exteriors that have been painted and repainted have been exposed to both harsh elements and improper paint jobs, which often lead to potential problems when applying another coat of paint. Some of these issues that we are trained to identity and remediate include: alligator scaling, lifting and peeling, tannin bleed, inner coat adhesion, and many others. Failure to note these issues at the time of the estimate can lead to huge issues after the paint job begins. Too often companies failing to notice these issues will not be able to remediate them, and the client will be left with a paint job destined to fail and lead to more problems and wasted money. With Reborn, the chances of these problems arising are greatly reduced, as we know to look for signs of them when we do our estimates.
Mostly all exterior painting and coatings require a power wash prior to top coating. Power washing removes loose paint, dirt, grime, grease, and other contaminants that are almost always the root cause of product failure. Power washing is also an alternative to painting if the paint job is in decent shape and a simple cleaning of the surface will suffice. It is often a low cost and effective way to revitalize the curb appeal of your home. Some specialty applications include cleaning dirty decks and fences, vinyl, aluminium, stucco, and wood siding, garage floors, driveways, BBQs, stone walkways, patio furniture, roofs, algae build up on pools, landscaping machinery and heavy equipment, and more. Reborn uses special additives and detergents, such as degreasers, bleach, siding cleaner, deck cleaner, wood conditioners, etc., which work together with the power washer to properly clean and prepare surfaces for top coats. Reborn is able to effectively remove algae, mold, mildew, calcium, grease, oils, as well enhance and revitalize areas requiring heavy duty cleaning.
Garage Floors Coatings
Give your garage floor a unique and refreshing look with a wide variety of specialty coating systems; including custom tints and design work. We can stain your garage pad, and even match the color scheme to your favourite sports team, Nascar driver, and much more.
Sealing and applying coatings to your driveway is very beneficial. Proper sealants will protect the concrete from absorbing dirt, grease, stains, spills, etc. that are really difficult to remove, and in effect take away from the potential curb appeal and structural integrity of a nicely finished and maintained driveway. There are many options from clear sealers in various sheens, to painting and more.
Landscape Masonry Sealing
Sealers and clear coats are also a nice way to protect stonework on and around your home, as well as deliver a fresh and luxurious look. By properly cleaning and preparing the surface, applying top quality clear coats, and recoating every few years, landscape masonry can easily be a well maintained feature of your home sure to be the recipient of many compliments. There are also numerous aggregates that may be added to the clear coat to give extra character to the stone work, similar to some stone counter top finishes. Not only are sealers and clear coats great for maintaining newer stone, but they also revitalize stone work that may be weathered over time by filling in cracks and providing an updated finish.
Tile & Grout Sealing
For added protection and a refreshed appearance, sealing is an easy and cost effective way to prolong the finish on your tile work. This is especially important in high traffic and high moisture areas, where dirt, grease, and moisture may lead to stains and potential build up of mold, mildew, and other nasty films. Not only are these build ups difficult to clean, but they may also lead to further damage if moisture seeps through the grout and penetrates the backer board and/or sub floor. Furthermore, the aesthetic value of the tile in your home may be compromised, which is not only an eye sore, but also may turn off a potential buyer.
Many tile companies do not seal the grout when installing tile in your home, as it means an extra trip in 30 days, when the grout has properly cured. Although the tilers ought to inform their clients of this, and offer to return for proper sealing of grout if requested, we are happy to finish the job for them if for some reason they are not able to return.
In areas that are prone to water, ice, and other slip-causing agents such as grease, oils, etc., specialty non-slip coatings ought to be applied to ensure the safety of people using those areas. From clear coat technologies with non slip additives, to granular additives for liquid coatings, Reborn offers many solutions for areas that require non-slip coatings, such as concrete/stone steps and surfaces, tile floors, pool decks, locker room floors, bath tubs, ramps, commercial and retail stores, and more.